next generation rf remote extender manual

You have now converted your standart IR remote to RF just by replacing the battery!Īdvantages - comparison with other (non-battery) IR signal extenders (e.g.

Connect the UFON to the power supply using the supplied power supplier.

place the receiver (UFON shape) in front of the device you want to control, if this is not possible, connect the IR eye cable with UFON and place the IR eye in front of the device.

If your controller works with AA battery then use the supplied AA adapter - insert the assembled transmitter into the AA adapter to replace the AA battery in your remote.

Replace one standart AAA battery in your remote control with the mini-AAA battery trasmitter.Insert one of the two supplied (included) mini-AA batteries into the AAA battery size sleeve marked 'Transmitter'.Plug & Play - as easy as replacing a battery: It also solves the problem with remote controls interference for operation of multiple same-brand remotes in the same home. UFON works works with every standart IR remote control with AA or AAA battery – either for TV, DVD, home theatre, VCR etc.Īre you not satisfied with the range and sensitivity of your remote control? You have to point directly at your device while standing close to it? UFON is a solution! With General UFON you do not need to point at all! This Remote extender kit enables you to control any device through wall, ceiling or through any other obstacle without pointing. You don't have to point at the device at all, giving you the freedom to go from room to room. Just replace one battery in your existing controller with a special UFON battery and you have now added RF (radio frequency) to your existing AA or AAA remote controls. The remote will work through the walls, doors, floors all over your house. General UFON converts any common infrared (IR) remote control into radio (RF) remote. NO DIRECT LINE OF SIGHT NEEDED! SIGNAL RANGE THROUGHOUT THE HOUSE! YOU DONT HAVE TO POINT THE REMOTE!

Next generation rf remote extender manual